Subaquatic slope instabilities: The aftermath of river correction and artificial dumps in Lake Biel (Switzerland)

River engineering projects are developing rapidly across the globe, drastically modifying water courses and sediment transfer. Investigation of the impact of engineering works focuses usually on short-term impacts, thus a longer-term perspective is still missing on the effects that such projects have. The ‘Jura Water Corrections’ – the largest river engineering project ever undertaken in Switzerland – radically modified the hydrological system of Lake Biel in the 19th and 20th Century. The deviation of the Aare River into Lake Biel more than 140 years ago, in 1878, thus represents an ideal case study to investigate the long-term sedimentological impacts of such large-scale river rerouting. Sediment cores, along with new high-resolution bathymetric and seismic reflection datasets were acquired in Lake Biel to document the consequences of the Jura Water Corrections on the sedimentation history of Lake Biel. Numerous subaquatic mass transport structures were detected on all of the slopes of the lake. Notably, a relatively large mass transport complex (0·86 km²) was observed on the eastern shore, along the path of the Aare River intrusion. The large amount of sediment delivered by the Aare River since its deviation into the lake likely caused sediment overloading resulting in subaquatic mass transport. Alternatively, the dumping since 1963 in a subaquatic landfill of material excavated during the second phase of river engineering, when the channels flowing into and out of Lake Biel were widened and deepened, might have triggered the largest mass transport, dated to 1964 or 1965. Additional potential triggers include two nearby small earthquakes in 1964 and 1965 (M_W 3·9 and 3·2, respectively). The data for this study indicate that relatively large mass transports have become recurrent in Lake Biel following the deviation of the Aare River, thus modifying hazard frequency for the neighbouring communities and infrastructure.     

Timing of megakinks and related structures: Constraints from the Devonian Bunga‐Wapengo Basin,Mimosa Rocks National Park,New South Wales

The Bunga beds are bounded by faults adjacent to which are fanglomerates that form part of an early Late Devonian volcanic rift basin. Some cross‐faults acted as precursors for later regional deformation that kinked the Ordovician basement and gently folded the basin sediments in a northwest‐southeast direction. Details of the faulted junction at Picnic Point and orientation of cleavage microstructures in the fanglomerates support the dating of the north‐south regional F₂ deformation as Middle Devonian or older and the northwest‐southeast F₃ kinking as post‐early Late Devonian.     

Particle aggregation in microgravity: Informal experiments on the International Space Station

We conducted experiments in space to investigate the aggregation of millimeter‐ and submillimeter‐sized particles in microgravity, an important early step in planet formation. Particulate materials included salt (NaCl), sugar (sucrose), coffee, mica, ice, Bjurböle chondrules, ordinary and carbonaceous chondrite meteorite fragments, and acrylic and glass beads, all triply confined in clear plastic containers. Angular submillimeter particles rapidly and spontaneously formed clusters strong enough to survive turbulence in a protoplanetary nebula. Smaller particles generally aggregated more strongly and quickly than larger ones. We observed only a weak dependence of aggregation time on particle number density. We observed no strong dependence on composition. Round, smooth particles aggregated weakly or not at all. In a mixture of particle types, some phases aggregated more readily than others, creating selection effects that controlled the composition of the growing clumps. The physical process of aggregation appears to be electrostatic in nature.     

Peak atmospheric entry temperatures of micrometeorites

Abstract— We present numerical calculations of the peak temperatures experienced by micrometeorites during atmospheric entry. Results are given for particle diameters between 2 and 50 μm and for entry velocities between 10 and 25 km/s. A material density of 2 g/cm³ and an entry angle of 45° are used for the calculation, but the results presented here can be easily reinterpreted for other densities and for vertical entry.     

Analysis of subsurface mound spring connectivity in shale of the western margin of the Great Artesian Basin, South Australia

Mound springs provide the primary discharge mechanism for waters of the western margin of the Great Artesian Basin (GAB), Australia. Though these springs are an important resource in an arid environment, their hydraulics as they discharge from shale are poorly defined. The springs can include extensive spring tails (groundwater-dependent wetlands) and hundreds of springs in a given spring complex. Electrical resistivity imaging (ERI) was used to evaluate spring subsurface hydraulic-connectivity characteristics at three spring complexes discharging through the Bulldog Shale. The results demonstrate that fresher GAB water appears as resistors in the subsurface at these sites, which are characterized by high-salinity conditions in the shallow subsurface. Using an empirical method developed for this work, the ERI data indicate that the spring complexes have multiple subsurface connections that are not always easily observed at the surface. The connections are focused along structural deformation in the shale allowing fluids to migrate through the confining unit. The ERI data suggest the carbonate deposits that the springs generate are deposited on top of the confining unit, not precipitated in the conduit. The data also suggest that spring-tail ecosystems are not the result of a single discharge point, but include secondary discharge points along the tail.     

Hydrocarbons generated by hydropyrolysis of suspended marine particulate organic matter: Relationship to the oceanography of the Black Sea and the Rhodes Gyre

The suspended particulate organic matter, SPOM, in the autumnal Black Sea has been characterised using catalytic hydropyrolysis (HyPy) of the total (bound plus free) lipid material. The technique, which generates maximum yields of volatile products from sediments, kerogens and phytoplankton, was followed using gas chromatography and gas chromatography/mass spectrometry. The generated alkanes were dominated by n-C₁₈, hypothesised to arise predominantly from unsaturated C₁₈ fatty acids. Steranes were generated from reductive conversion of free and bound sterols. The generation of branched alkanes and especially of hopanes provided formal evidence for the participation of bacteria in the mineralisation of the SPOM. Whereas similar distributions of n-alkanes were generated from SPOM sampled from different depths of the comparatively well-stirred Rhodes Gyre (eastern Mediterranean), mineralisation of the SPOM at each depth of the central Black Sea produced characteristic changes in the composition and concentration of the HyPy products. Depth profiles of the n-alkanes generated from SPOM in the region of the Rim Current were affected by the local hydrography. Polynuclear aromatic hydrocarbons (PAHs) of anthropogenic origin were present in the surface waters of the central Black Sea. Some methyl benzenes, thiophenes and pyrroles were also generated.     

Smart optics in ast

Smart optics means much more than adaptive optics on telescopes: these new technologies are changing the way space instruments are built and operated and are bringing new technologies into everyday life in the form of cheaper, lighter and more robust optical systems. Steve Welch, Peter Doel, Alan Greenaway and Gordon Love summarize the work of the Smart Optics Faraday Partnership in the UK.     

Studies on turbulent diffusion processes and evaluation of diffusivity values from hydrodynamic observations in Corpus Christi Bay

The physical process of dispersion which can be attributed to turbulence (turbulent diffusion) or shear (shear-augmented diffusion) within the flow field is very important as it ultimately governs the distribution of constituents of interest within the environment. A series of diffusion experiments were conducted in Corpus Christi Bay, TX with the purpose of characterizing turbulent diffusion through dispersion coefficients or turbulent diffusivity, K_i (i=x, y, z) dependent on the degree of randomness or turbulence intensity, I.Measured with a boat-mounted acoustic doppler current profiler (ADCP), the Eulerian velocity time-series of fluid particles in random motion, u_i was used in the evaluation of the Eulerian time-scale of turbulence, T^E based on the velocity correlation function, R^E with T^E being related to the Lagrangian time-scale T^L through a scaling parameter, β(=T^L/T^E). Surface currents were obtained with high frequency (HF) Radar equipment deployed over the study area from which the horizontal velocity gradients were determined.Within the spatial scale of the experiment (1000 m), the observed low horizontal gradients (10⁻⁴ s⁻¹) allowed for the generation of velocity time-series from an ADCP mounted on a moving platform. A numerical scheme for evaluating turbulent diffusivity values was developed on the basis of Eulerian current measurements and calibrated through the statistics of an evolving dye patch for the scaling parameter β which in this scheme was found to be in the range 1–3.     

The Geoarchaeology of Mudbricks in Architecture: A Methodological Study from Çatalhöyük,Turkey

This article provides a methodology for extracting social information through an analysis of mudbrick compositions, using a case study from Çatalhöyük, Turkey. Particle size analysis, loss on ignition, and magnetic susceptibility were used to examine variability in mudbrick recipe. The analysis revealed that neither magnetic susceptibility nor calcium carbonate were significantly altered through tempering. The results suggest that the greatest degree of compositional variability was a result of the manufacture process and not raw materials used in production. Mudbricks are products of deliberate human actions, similar to any other artifact assemblage, but have been long overlooked. Examining the technology involved with mudbrick manufacture highlights aspects of Neolithic social life through shared resources, production choices, and organization of labor. The analysis of mudbrick compositions considers how raw materials were used within and between groups of houses, represented in 1000 years of uninterrupted occupation at Çatalhöyük.